高性能有机氟材料制备科学及应用进展

有机氟材料具有优异的热氧稳定性、耐化学腐蚀性、耐老化性、不黏性、电绝缘性以及极小的摩擦系数等特性，因此作为一种不可替代的材料广泛应用于高新技术产业。近年来高新技术产业发展对高性能有机氟材料的需求引发了学术界和工业界对氟材料的研究兴趣。依据本文作者的研究经历及有机氟材料的发展方向，本文介绍了氟树脂（新型含氟聚合物、电活性含氟聚合物、新型全氟磺酸聚合物、聚四氟乙烯3D打印）及氟橡胶（过氧化物硫化氟橡胶、耐低温氟醚橡胶、耐高温全氟醚橡胶、全氟聚醚基类玻璃橡胶）的制备科学及应用进展，特别阐述为了满足航空航天、能源、信息等高新技术产业需求发展的新一代高性能有机氟材料。本文也介绍了近期出现的聚四氟乙烯新成型技术及类玻璃氟橡胶。文章指出发展绿色环保和高效的高性能有机氟材料制备及成型加工方法是今后的发展方向。     

An effective method of bulk materials moisture measurement using capacitive sensors

When we speak about capacitance moisture meters for bulk materials we have to face with different values of dielectric permittivity for different bulk materials in dehydrated state, what causes a method error that can be named ‘type uncertainty’. Besides, different varieties of the same material have different values of dielectric permittivity, which depend from geographical origin, processing conditions etc. It can be hardly predicted automatically and type uncertainty can be compensated only in separate situations with the help of preliminary calibration. Main tasks of the research are to develop new comparison principle of moisture measurement with better accuracy due to effective compensation of physical, chemical and granulometric composition influence on the result of moisture measurement, develop new primary and secondary instrument transducers. Moisture sensor consists of four measuring capacitors. Two of them should be filled with a sample, which moisture content should be determined, and other pair of measuring capacitors should be filled with a same substance, but previously dehydrated. Mathematical models, developed to take into account granulometric composition of a bulk material were used to carry out a comparison analysis for three types of instrument measuring transducers. Obtained results proved that suggested principle of moisture measurement provides effective compensation of granulometric composition influence. Developed measuring principle had been experimentally tested what helped to confirm that it provides two times better compensation of different physical and chemical composition for different materials in comparison with the direct comparison method.     

Structural and electrical properties of Cr-doped SrTiO3 porous materials

Series of single-phase materials with assumed formula SrTi_1?xCr_xO₃ (where x = 0, 1, 4, 6 mol.%) were obtained by sol-gel method. The structure and microstructure of materials were characterised by X-ray diffraction and scanning electron microscopy methods. Moreover, the study of electrical properties and evaluation of chemical stability in CO₂/H₂O atmosphere was performed by electrochemical impedance spectroscopy and thermogravimery methods, respectively. The possibility of participation of Cr-doped strontium titanate in oxidation–reduction processes was analysed by temperature-programed reduction (TPR) and temperature-programed oxidation (TPOx) measurements. The changes of lattice parameters together with XPS analysis, the Seebeck coefficient measurements results and TPR profiles obtained for SrTi_1?xCr_xO₃ materials prove the presence of chromium on +3 and +6 oxidation stages. Thus, chromium can be treated as both acceptor- and donor-type dopant in the SrTiO₃ structure. The Cr³⁺/Cr⁶⁺ ratio strongly affects the electrical properties, as the change of conduction mechanism was observed. The results of performed stability test clearly indicate that incorporation of chromium into SrTiO₃ structure results with decrease of chemical stability in CO₂ atmosphere.     

Olfactory responses of Stegobium paniceum to different Chinese medicinal plant materials and component analysis of volatiles

Stegobium paniceum (L.) (Coleoptera: Anobiidae) is among the major pests of stored products, causing great damage to stored Chinese medicinal plant materials (CMPMs) in China. Effective control strategies are urgently needed. The aim of this study was to explore the role of volatile organic compounds in the host preference of S. paniceum. First, the olfactory behavioral responses of S. paniceum adults to volatiles from four CMPMs (Panax notoginseng, Angelica sinensis, Gastrodia elata, and Peucedanum praeruptorum) were tested in Y-tube olfactometer experiments. Then, the volatile composition of these plant materials were analyzed by gas chromatography-mass spectrometry (GC-MS). S. paniceum showed significant preferences for volatiles from the four CMPMs, compared with clean air (CA). When S. paniceum was presented with choices among different CMPMs, it showed the strongest preference for P. notoginseng, followed by A. sinensis, then G. elata, and P. praeruptorum. GC-MS analysis identified 43, 34, 28 and 60 components in the volatile profiles of P. notoginseng, A. sinensis, G. elata, and P. praeruptorum, respectively. Falcarinol (14.4%), 3-n-butyl phthalide (78.7%), p-cresol (40.1%), and β-pinene (29.1%) were the most abundant components of the volatiles of P. notoginseng, A. sinensis, G. elata, and P. praeruptorum, respectively. The olfactory responses of S. paniceum to the four CMPMs demonstrated that host-related volatiles play an important role in the host-searching process by adult beetles. This information will be useful for the development of safe and effective trapping strategies for this pest.     

Changes in accommodative micro-fluctuations after wearing contact lenses of different optical designs

PurposeAccommodative micro-fluctuations (AMF) are small dioptric changes during accommodation. The aim of this study was to evaluate and compare changes in AMF when wearing silicone hydrogel contact lenses of two different optical designs.MethodsA multi-centre, randomised, cross-over, non-dispensing study was conducted on 68 adapted contact lens wearers aged 25–35 years to compare AMF responses to a spherical and aspheric silicone hydrogel (comfilcon A) lens designs. A Righton Speedy “i” series Auto Refractometer in accommodation analyser mode was utilized before and after reading a standard text in font size 8 on an iPhone 5 for 20 min at a 25 cm viewing distance. Phone screen brightness was set by automatic adjustment mode and ambient illumination was controlled at all sites.ResultsMean ± SD AMF change from before to after the reading task was 2.25 ± 5.6 and 0.13 ± 5.7 (relative values) for the spherical and aspheric lens designs, respectively. The difference was statistically significant (P = 0.017, Paired t-test).ConclusionsThe smaller change in AMF when using an aspheric lens design suggests reduced ciliary muscle stress when reading print on a smart phone at a close distance for short periods (20 min). Contact lens wearers who frequently use digital devices and are experiencing eye strain may benefit from switching from a spherical design to one that incorporates aspheric optics.     

燃油选择性吸附脱硫的多孔材料研究进展

吸附脱硫技术具有操作条件温和、节能、不改变燃油品质和成本低等特点而备受关注。针对噻吩类难脱除硫化物的深度脱除和转化问题，综述了近年来应用多孔吸附材料选择性吸附超深度脱除燃油中噻吩类硫化物的作用机理及最新研究进展。重点分析了分子筛、金属有机骨架、多孔炭材料、复合材料等不同吸附剂的研究现状，并探讨了各种吸附材料的吸附机理、改性方式和优缺点。本文指出分子筛因优异的热稳定性、高比表面积、均一的孔道结构、低成本和易于工业化等特点，是目前最具优势的吸附剂材料。未来研究应着重阐明吸附机理、提高合成便捷性、脱硫性能以及再生能力，更全面系统的研究将为开发具有理想选择性和再生能力的高效吸附剂奠定基础。     

The Electron–Phonon Interaction of Low-Dimensional and Multi-Dimensional Materials from He Atom Scattering

Atom scattering is becoming recognized as a sensitive probe of the electron–phonon interaction parameter λ at metal and metal-overlayer surfaces. Here, the theory is developed, linking λ to the thermal attenuation of atom scattering spectra (in particular, the Debye–Waller factor), to conducting materials of different dimensions, from quasi-1D systems such as W(110):H(1 × 1) and Bi(114), to quasi-2D layered chalcogenides, and high-dimensional surfaces such as quasicrystalline 2ML-Ba(0001)/Cu(001) and d-AlNiCo(00001). Values of λ obtained using He atoms compare favorably with known values for the bulk materials. The corresponding analysis indicates in addition, the number of layers contributing to the electron–phonon interaction, which is measured in an atom surface collision.     

Impacts of layout,surface condition and alloying elements on diffusion welding of micro process devices

The formation of a monolithic part during diffusion bonding is accompanied by the diffusion of atoms across the bonding planes. At sufficient low roughness, it mainly depends on the temperature and dwell time. At the same time, the diffusion process competes against grain growth. By adjusting an appropriate level of bearing pressure, it is possible to control deformation taking into account additional parameters resulting from mechanical microstructures and the design and aspect ratio of the part. Furthermore, material properties, such as the content of alloying elements, the degree of cold work hardening and the grain size, have an impact on diffusion and deformation behavior. Also the surface condition of mating surfaces is important to diffusion kinetics and the quality of the joint. Especially passivation layers of corrosion‐resistant alloys, such as stainless steels and nickel‐based alloys, impair diffusion. In contrast to this, cold work hardening at low depth below the surface, e. g. by means of a blasting processes, may facilitate formation of a good bond and help to limit grain size. For oxide dispersion‐strengthened materials, additional impacts on diffusion bonding behavior applies.     

A parametric investigation on seat/occupant contact forces and their relationship with initially perceived discomfort using a configurable seat

The present work investigates the contact forces between sitters and seat as well as their correlations with perceived discomfort. Twelve different economy class aeroplane seat configurations were simulated using a multi-adjustable experimental seat by varying seat pan and backrest angles, as well as seat pan compressed surface. Eighteen males and 18 females, selected by their body mass index and stature, tested these configurations for two sitting postures. Perceived discomfort was significantly affected by seat parameters and posture and correlated both with normal force distribution on the seat-pan surface and with normal forces at the lumbar and head supports. Lower discomfort ratings were obtained for more evenly distributed normal forces on the seat pan. Shear force at the seat pan surface was at its lowest when sitters were allowed to self-select their seat-pan angle, supporting that a shear force should be reduced but not zeroed to improve seating comfort.

Practitioner Summary: The effects of seat-pan and backrest angle, anthropometric dimensions and sitting posture on contact forces and perceived discomfort were investigated using a multi-adjustable experimental seat. In addition to preferred seat profile parameters, the present work provides quantitative guidelines on contact force requirement for improving seating comfort.     

Fabrication of 0.24Pb(In1/2Nb1/2)O3-0.42Pb(Mg1/3Nb2/3)O3-0.34PbTiO3 transparent ceramics by conventional sintering technique

0.24Pb(In_1/2Nb_1/2)O₃-0.42Pb(Mg_1/3Nb_2/3)O₃-0.34PbTiO₃ transparent ceramics were fabricated by a conventional sintering technique. Through optimization of sintering conditions of calcination and sintering temperatures and time, the obtained ceramics showed high optical transmittance of 53% and 71% at light wavelengths of 1300 and 2000 nm, respectively. The ceramics showed a rhombohedral to tetragonal phase transition at ~120°C and a tetragonal to cubic phase transition at 222°C. These transition temperatures were higher than those of 0.67Pb(Mg_1/3Nb_2/3)-0.33PbTiO₃ ceramics. In addition, the ceramics had a ferroelectric hysteresis loop, a large piezoelectric constant d₃₃ of 407 pC/N, and a planar electromechanical coupling factor k_p of 52%. These results suggest that the transparent ceramics may be used as a temperature-stable, linear electro-optic material.